GPR Services · Okanagan
Rebar & Conduit Locating in Kelowna, BC
Know exactly what's inside the concrete — rebar mats, electrical conduits, embedded pipes — before you drill into any of it. Serving Kelowna and the Okanagan region with certified technicians, non-invasive methods, and insurance-ready documentation — since 1999.
Free phone consult · No pressure · Mon–Sat 8am–6pm PT
Kelowna ground conditions & what they mean for GPR
Local geology: Kelowna sits on dry glaciolacustrine silts and sandy benches — classic Okanagan GPR country. Dry silts and sands give the deepest, cleanest GPR returns in BC — 3–4 m is routine. Irrigation saturation creates local wet anomalies that are themselves diagnostic of leaks.
Local building stock: Lakefront estates with pools and extensive irrigation, orchard and vineyard parcels, and a fast-rising downtown tower skyline.
Common rebar & conduit locating work in Kelowna
- Vineyard and orchard irrigation mapping
- Pool and lakefront estate leak detection
- Tower core-drilling clearance downtown
- PT cable mapping in lakefront tower construction
- Anchor bolt layouts
- Electrical conduit avoidance
- Wall penetrations
How the Kelowna site visit works
- 1
Scan the penetration points
Each drill or anchor location gets a local 1.6 GHz scan in two directions — a 60-second operation per point.
- 2
Distinguish targets
Rebar, conduit, and pipe have distinct reflection signatures and depths; each is identified and labelled.
- 3
Mark clear zones
Safe drilling windows marked directly on the surface; obstructed points get an offset recommendation.
- 4
Same-visit clearance
Crews typically drill immediately after marking — one mobilisation, zero strikes.
Kelowna questions, answered
How small a conduit can GPR see?
A 12 mm conduit at 50 mm depth resolves clearly with the 1.6 GHz antenna. Resolution decreases with depth — at 300 mm, closely spaced small targets can merge — which is why we scan every penetration point individually rather than extrapolating.
Hitting one conduit doesn't sound expensive. Why scan?
A severed feeder in a live commercial building means an electrician, an outage, possibly a fire-watch, and a schedule slip — routinely $5,000–$50,000 against a scan that costs a few hundred dollars. Hitting a water line in a wall is worse. The economics are not close.
Can you scan walls and ceilings, not just floors?
Yes — the concrete antenna works on any orientation. Wall penetrations for sleeves and ceiling anchors for mechanical hangers are everyday scans.
Do you mark directly on the surface?
Yes — targets in one colour, safe windows in another, photographed for the report. Crews drill against the marks the same visit.
How deep can GPR scan in Kelowna?
Kelowna sits on dry glaciolacustrine silts and sandy benches — classic Okanagan GPR country. Dry silts and sands give the deepest, cleanest GPR returns in BC — 3–4 m is routine. Irrigation saturation creates local wet anomalies that are themselves diagnostic of leaks. We select antenna frequency to match — and where local ground limits radar depth, we pair GPR with electromagnetic locating, acoustic methods, or tracer gas so the survey objective is met regardless of soil conditions.
Do you actually work in Kelowna, or dispatch from elsewhere?
Kelowna is part of our standing Okanagan service area — the same certified technicians and equipment that cover the rest of the region. Scheduling is typically within 24–72 hours, with same-day response often possible during business hours (Mon–Sat, 8am–6pm Pacific).
What does rebar & conduit locating cost in Kelowna?
Pricing matches our province-wide structure — no regional premium for Kelowna. Most residential-scale work falls in the $350–$1,200 range depending on scope; commercial and multi-site projects are quoted after a free phone consult. Call 604-239-9934 and we will give you a tight estimate in five minutes.
Other GPR services in Kelowna
Concrete Scanning in Kelowna
The full picture inside any slab, wall, or beam — rebar, PT cables, conduits, voids, thickness — imaged at 1.6 GHz before a single cut.
View servicePost-Tension Cable Mapping in Kelowna
Cutting a live PT cable releases tonnes of force instantly. GPR maps every cable before any coring, cutting, or anchoring on a post-tensioned slab.
View serviceCore Drilling Safety Scanning in Kelowna
Every core hole cleared before the bit touches concrete — rebar, PT cables, conduits, and in-slab pipes mapped at each penetration point.
View service← All about rebar & conduit locating·All GPR services·GPR guide
Rebar & Conduit Locating near Kelowna
Need rebar & conduit locating in Kelowna?
Free phone consult with a certified GPR technician — we will tell you whether a survey is warranted and quote it in five minutes. No pressure.