Aerial Thermal · Sea-to-Sky
Roof Thermal Inspection in Whistler, BC
Radiometric drone thermography over flat commercial and industrial roofs — trapped moisture, failed insulation, and developing leaks mapped before interior damage shows. Flown by Transport Canada-certified RPAS pilots serving Whistler and the Sea-to-Sky region — since 1999 as BC's leak detection and inspection specialists.
Free phone consult · No pressure · Mon–Sat 8am–6pm PT
Flying Whistler: local context
Resort lodges, steep chalet roofs, and snow-load concerns — aerial inspection avoids winter roof access entirely.
Local asset profile: Resort village with snowmelt-heated hardscapes, chalet neighbourhoods on private wells and long services, and strata lodges with complex mechanical systems.
Typical roof thermal inspection work around Whistler
- Lodge roof and envelope surveys
- Chalet snow-season assessments
- Flat commercial and industrial roofs
- Pre-purchase and pre-warranty surveys
- Post-storm assessments
How the Whistler survey runs
- 1
Evening flight window
Wet insulation holds daytime heat after sunset — the survey flies in that contrast window for maximum signal.
- 2
Radiometric mapping
Calibrated thermal plus visual overlay captures the full roof; anomalies are measured, not just colourful.
- 3
Verification
Thermal anomalies are confirmed as moisture (vs. shading or material artifacts) by pattern analysis and, where useful, on-roof spot checks.
- 4
Moisture plan
A roof plan with quantified wet zones — the document that turns 'replace it all' into targeted repairs.
Whistler questions, answered
How does thermal imaging find roof moisture?
Water has high thermal mass: insulation that got wet during the day re-radiates heat after sunset noticeably longer than dry insulation. A radiometric sensor measures that differential — wet zones literally glow against the cooling roof field, and the imagery maps their boundaries.
Why fly it instead of walking the roof with a camera?
Coverage, consistency, and membrane safety. A drone maps hectares in an evening at uniform angle and altitude with GPS-tagged frames — no missed bays, no foot traffic on an aging membrane, no fall exposure. Walking surveys still have a place for verification cores; the aerial map decides where.
Can you inspect any roof type?
Best results come from flat and low-slope membrane systems (BUR, mod-bit, EPDM, TPO) over absorbent insulation. Ballasted and inverted assemblies attenuate the signal and are assessed case-by-case. Metal and steep roofs are usually better served by our envelope thermal service.
What does the deliverable look like?
A scaled roof plan with outlined moisture zones, the radiometric evidence per zone, square-metre quantities, and repair-priority ranking — formatted for owners, roofing contractors, and insurers to act on directly.
Can you legally fly drones for inspection in Whistler?
Yes — our pilots hold Transport Canada RPAS certification with advanced-operations capability, and Whistler operations run under whatever airspace authorizations the location requires. Resort lodges, steep chalet roofs, and snow-load concerns — aerial inspection avoids winter roof access entirely. Flight planning, NOTAM checks, and authorizations are part of the service, not your problem.
How does Whistler weather affect scheduling?
Aerial inspection flies in defined weather windows — wind, precipitation, and (for thermal work) the right temperature differentials. Whistler sits in our standing Sea-to-Sky coverage, so we schedule against the local forecast and typically land the survey within days of booking rather than weeks. Mon–Sat, 8am–6pm Pacific.
What does roof thermal inspection cost in Whistler?
Province-wide pricing — no regional premium for Whistler. Single-asset thermal surveys typically start in the high hundreds; NDT campaigns and multi-asset programs are quoted by scope. The free phone consult (604-239-9934) produces a firm number in about five minutes.
Other aerial services in Whistler
Aerial Façade & Envelope Thermal in Whistler
Thermal bridges, insulation gaps, air leakage, and moisture behind cladding — full-height envelope thermography for high-rises without a single rope or swing stage.
View serviceAerial Industrial Thermal Survey in Whistler
Heat-loss mapping on tanks and pipelines, refractory damage, stack hot spots, and district-energy networks — plant-scale radiometric surveys from the air.
View serviceAerial Solar Farm Inspection in Whistler
Hot spots, string failures, bypass-diode faults, and underperforming modules — radiometric drone survey of entire PV arrays without taking the system offline.
View serviceAerial Ultrasonic Testing (UT) in Whistler
Contact UT wall-thickness measurement delivered by drone — corrosion mapping on tanks, stacks, and structures at height without scaffolding, rope access, or shutdown.
View service← All about roof thermal inspection·Aerial inspection hub·drone.leak.ca
Aerial Roof Thermal Inspection near Whistler
Need roof thermal inspection in Whistler?
Free phone consult — asset, access, airspace, and a firm quote in five minutes. No pressure.