Free phone consult with a 25-year leak expert. Call 604-239-9934

Aerial Thermal · Metro Vancouver

Roof Thermal Inspection in Burnaby, BC

Radiometric drone thermography over flat commercial and industrial roofs — trapped moisture, failed insulation, and developing leaks mapped before interior damage shows. Flown by Transport Canada-certified RPAS pilots serving Burnaby and the Metro Vancouver region — since 1999 as BC's leak detection and inspection specialists.

640×512+
Radiometric resolution
≤ 50 mK
Thermal sensitivity (NETD)
ha/flight
Large-roof coverage rate

Free phone consult · No pressure · Mon–Sat 8am–6pm PT

Flying Burnaby: local context

Metrotown/Brentwood towers plus refinery-adjacent industry give Burnaby both envelope and industrial-thermal demand.

Local asset profile: Metrotown and Brentwood tower clusters on post-tensioned slabs, 1960s–70s walk-ups mid-slope, and heavy industrial along the Fraser.

Typical roof thermal inspection work around Burnaby

  • Tower façade scans
  • Industrial heat-loss mapping
  • Flat commercial and industrial roofs
  • Pre-purchase and pre-warranty surveys
  • Post-storm assessments

How the Burnaby survey runs

  1. 1

    Evening flight window

    Wet insulation holds daytime heat after sunset — the survey flies in that contrast window for maximum signal.

  2. 2

    Radiometric mapping

    Calibrated thermal plus visual overlay captures the full roof; anomalies are measured, not just colourful.

  3. 3

    Verification

    Thermal anomalies are confirmed as moisture (vs. shading or material artifacts) by pattern analysis and, where useful, on-roof spot checks.

  4. 4

    Moisture plan

    A roof plan with quantified wet zones — the document that turns 'replace it all' into targeted repairs.

Burnaby questions, answered

How does thermal imaging find roof moisture?

Water has high thermal mass: insulation that got wet during the day re-radiates heat after sunset noticeably longer than dry insulation. A radiometric sensor measures that differential — wet zones literally glow against the cooling roof field, and the imagery maps their boundaries.

Why fly it instead of walking the roof with a camera?

Coverage, consistency, and membrane safety. A drone maps hectares in an evening at uniform angle and altitude with GPS-tagged frames — no missed bays, no foot traffic on an aging membrane, no fall exposure. Walking surveys still have a place for verification cores; the aerial map decides where.

Can you inspect any roof type?

Best results come from flat and low-slope membrane systems (BUR, mod-bit, EPDM, TPO) over absorbent insulation. Ballasted and inverted assemblies attenuate the signal and are assessed case-by-case. Metal and steep roofs are usually better served by our envelope thermal service.

What does the deliverable look like?

A scaled roof plan with outlined moisture zones, the radiometric evidence per zone, square-metre quantities, and repair-priority ranking — formatted for owners, roofing contractors, and insurers to act on directly.

Can you legally fly drones for inspection in Burnaby?

Yes — our pilots hold Transport Canada RPAS certification with advanced-operations capability, and Burnaby operations run under whatever airspace authorizations the location requires. Metrotown/Brentwood towers plus refinery-adjacent industry give Burnaby both envelope and industrial-thermal demand. Flight planning, NOTAM checks, and authorizations are part of the service, not your problem.

How does Burnaby weather affect scheduling?

Aerial inspection flies in defined weather windows — wind, precipitation, and (for thermal work) the right temperature differentials. Burnaby sits in our standing Metro Vancouver coverage, so we schedule against the local forecast and typically land the survey within days of booking rather than weeks. Mon–Sat, 8am–6pm Pacific.

What does roof thermal inspection cost in Burnaby?

Province-wide pricing — no regional premium for Burnaby. Single-asset thermal surveys typically start in the high hundreds; NDT campaigns and multi-asset programs are quoted by scope. The free phone consult (604-239-9934) produces a firm number in about five minutes.

Need roof thermal inspection in Burnaby?

Free phone consult — asset, access, airspace, and a firm quote in five minutes. No pressure.

Related content

Related guides, comparisons & specialist hubs

Internal navigation map for visitors and search engines — every Leak.ca pillar is one click away.