Free phone consult with a 25-year leak expert. Call 604-239-9934

Aerial Thermal · Metro Vancouver

Roof Thermal Inspection in Port Coquitlam, BC

Radiometric drone thermography over flat commercial and industrial roofs — trapped moisture, failed insulation, and developing leaks mapped before interior damage shows. Flown by Transport Canada-certified RPAS pilots serving Port Coquitlam and the Metro Vancouver region — since 1999 as BC's leak detection and inspection specialists.

640×512+
Radiometric resolution
≤ 50 mK
Thermal sensitivity (NETD)
ha/flight
Large-roof coverage rate

Free phone consult · No pressure · Mon–Sat 8am–6pm PT

Flying Port Coquitlam: local context

Distribution and rail-side industry — flat roofs and yard infrastructure at drone-friendly scale.

Local asset profile: Postwar bungalows mid-renewal, distribution warehouses on the floodplain, and a compact older downtown with mixed-age services.

Typical roof thermal inspection work around Port Coquitlam

  • Distribution-centre roof surveys
  • Yard asset thermal scans
  • Flat commercial and industrial roofs
  • Pre-purchase and pre-warranty surveys
  • Post-storm assessments

How the Port Coquitlam survey runs

  1. 1

    Evening flight window

    Wet insulation holds daytime heat after sunset — the survey flies in that contrast window for maximum signal.

  2. 2

    Radiometric mapping

    Calibrated thermal plus visual overlay captures the full roof; anomalies are measured, not just colourful.

  3. 3

    Verification

    Thermal anomalies are confirmed as moisture (vs. shading or material artifacts) by pattern analysis and, where useful, on-roof spot checks.

  4. 4

    Moisture plan

    A roof plan with quantified wet zones — the document that turns 'replace it all' into targeted repairs.

Port Coquitlam questions, answered

How does thermal imaging find roof moisture?

Water has high thermal mass: insulation that got wet during the day re-radiates heat after sunset noticeably longer than dry insulation. A radiometric sensor measures that differential — wet zones literally glow against the cooling roof field, and the imagery maps their boundaries.

Why fly it instead of walking the roof with a camera?

Coverage, consistency, and membrane safety. A drone maps hectares in an evening at uniform angle and altitude with GPS-tagged frames — no missed bays, no foot traffic on an aging membrane, no fall exposure. Walking surveys still have a place for verification cores; the aerial map decides where.

Can you inspect any roof type?

Best results come from flat and low-slope membrane systems (BUR, mod-bit, EPDM, TPO) over absorbent insulation. Ballasted and inverted assemblies attenuate the signal and are assessed case-by-case. Metal and steep roofs are usually better served by our envelope thermal service.

What does the deliverable look like?

A scaled roof plan with outlined moisture zones, the radiometric evidence per zone, square-metre quantities, and repair-priority ranking — formatted for owners, roofing contractors, and insurers to act on directly.

Can you legally fly drones for inspection in Port Coquitlam?

Yes — our pilots hold Transport Canada RPAS certification with advanced-operations capability, and Port Coquitlam operations run under whatever airspace authorizations the location requires. Distribution and rail-side industry — flat roofs and yard infrastructure at drone-friendly scale. Flight planning, NOTAM checks, and authorizations are part of the service, not your problem.

How does Port Coquitlam weather affect scheduling?

Aerial inspection flies in defined weather windows — wind, precipitation, and (for thermal work) the right temperature differentials. Port Coquitlam sits in our standing Metro Vancouver coverage, so we schedule against the local forecast and typically land the survey within days of booking rather than weeks. Mon–Sat, 8am–6pm Pacific.

What does roof thermal inspection cost in Port Coquitlam?

Province-wide pricing — no regional premium for Port Coquitlam. Single-asset thermal surveys typically start in the high hundreds; NDT campaigns and multi-asset programs are quoted by scope. The free phone consult (604-239-9934) produces a firm number in about five minutes.

Need roof thermal inspection in Port Coquitlam?

Free phone consult — asset, access, airspace, and a firm quote in five minutes. No pressure.

Related content

Related guides, comparisons & specialist hubs

Internal navigation map for visitors and search engines — every Leak.ca pillar is one click away.