GPR Services · Sea-to-Sky
Slab Leak Detection in Whistler, BC
GPR maps the in-slab plumbing and rebar so thermal and acoustic findings convert into a single small repair patch — not a jackhammered floor. Serving Whistler and the Sea-to-Sky region with certified technicians, non-invasive methods, and insurance-ready documentation — since 1999.
Free phone consult · No pressure · Mon–Sat 8am–6pm PT
Whistler ground conditions & what they mean for GPR
Local geology: Whistler sits on glacial outwash and till between bedrock knobs, seasonal frost at elevation. Outwash scans cleanly; resort-village utility density is the real challenge — heated walkways, snowmelt loops, and irrigation overlap in tight corridors.
Local building stock: Resort village with snowmelt-heated hardscapes, chalet neighbourhoods on private wells and long services, and strata lodges with complex mechanical systems.
Common slab leak detection work in Whistler
- Snowmelt loop tracing under village hardscape
- Chalet service line leak detection
- Lodge parkade and pool deck scanning
- In-slab copper and PEX lines
- Radiant heating loops
- Post-tensioned residential slabs
How the Whistler site visit works
- 1
Thermal pass
Infrared imaging maps the moisture or heat plume through the slab surface — the first non-invasive evidence of where the leak is.
- 2
GPR slab map
1.6 GHz GPR images every pipe, rebar bar, and PT cable in the suspect zone so we know exactly what is beneath the thermal anomaly.
- 3
Acoustic confirm
A ground microphone over the mapped pipe confirms the pressurised leak sound at the suspected point.
- 4
Patch window mark
Repair window marked between rebar/PT cables — your plumber cuts one tile-sized patch, clear of structure.
Whistler questions, answered
Why does the GPR step matter if thermal already found the warm spot?
The warm spot tells you roughly where the water is — not where the pipe is, or what else is embedded in the slab. Cutting on thermal alone risks hitting rebar or a post-tension cable. GPR maps the slab internals so the patch lands on the pipe and nothing else.
Can you scan post-tensioned slabs?
Yes — PT cable mapping is one of GPR's core jobs. Cutting a tensioned cable is catastrophic, so on any post-1970s suspended slab we map cables first and mark the repair window between them.
Does slab thickness affect detection?
Standard 100–200 mm residential and commercial slabs are well within 1.6 GHz range. Thickened footings and toppings up to ~45 cm still image clearly; beyond that we adjust antenna frequency.
Will my floor finish be damaged?
No. GPR, thermal, and acoustic are all surface-contact, non-destructive methods. The only opening ever made is the final repair patch — by your contractor, exactly where we mark.
How deep can GPR scan in Whistler?
Whistler sits on glacial outwash and till between bedrock knobs, seasonal frost at elevation. Outwash scans cleanly; resort-village utility density is the real challenge — heated walkways, snowmelt loops, and irrigation overlap in tight corridors. We select antenna frequency to match — and where local ground limits radar depth, we pair GPR with electromagnetic locating, acoustic methods, or tracer gas so the survey objective is met regardless of soil conditions.
Do you actually work in Whistler, or dispatch from elsewhere?
Whistler is part of our standing Sea-to-Sky service area — the same certified technicians and equipment that cover the rest of the region. Scheduling is typically within 24–72 hours, with same-day response often possible during business hours (Mon–Sat, 8am–6pm Pacific).
What does slab leak detection cost in Whistler?
Pricing matches our province-wide structure — no regional premium for Whistler. Most residential-scale work falls in the $350–$1,200 range depending on scope; commercial and multi-site projects are quoted after a free phone consult. Call 604-239-9934 and we will give you a tight estimate in five minutes.
Other GPR services in Whistler
Underground Water Leak Detection in Whistler
GPR + acoustic correlation locates buried water service line and main leaks before any excavation — typically narrowing the dig to a 1-metre window.
View servicePost-Tension Cable Mapping in Whistler
Cutting a live PT cable releases tonnes of force instantly. GPR maps every cable before any coring, cutting, or anchoring on a post-tensioned slab.
View serviceCore Drilling Safety Scanning in Whistler
Every core hole cleared before the bit touches concrete — rebar, PT cables, conduits, and in-slab pipes mapped at each penetration point.
View servicePipe Leak Detection in Whistler
Any pipe, any material — metal, PVC, PEX, asbestos-cement. GPR sees what EM locators can't, and pairs with acoustic and tracer gas for the confirmation.
View serviceSlab Leak Detection near Whistler
Need slab leak detection in Whistler?
Free phone consult with a certified GPR technician — we will tell you whether a survey is warranted and quote it in five minutes. No pressure.