GPR Services · Columbia
Slab Leak Detection in Revelstoke, BC
GPR maps the in-slab plumbing and rebar so thermal and acoustic findings convert into a single small repair patch — not a jackhammered floor. Serving Revelstoke and the Columbia region with certified technicians, non-invasive methods, and insurance-ready documentation — since 1999.
Free phone consult · No pressure · Mon–Sat 8am–6pm PT
Revelstoke ground conditions & what they mean for GPR
Local geology: Revelstoke sits on Columbia valley gravels and outwash under heavy snowpack. Gravels scan well in the snow-free season; deep frost and snowmelt saturation define the survey calendar more than the geology does.
Local building stock: Heritage railway town core, resort growth at the mountain base, and snowmelt-heavy municipal infrastructure.
Common slab leak detection work in Revelstoke
- Resort-base utility locates
- Heritage core service identification
- Snowmelt drainage tracing
- In-slab copper and PEX lines
- Radiant heating loops
- Post-tensioned residential slabs
How the Revelstoke site visit works
- 1
Thermal pass
Infrared imaging maps the moisture or heat plume through the slab surface — the first non-invasive evidence of where the leak is.
- 2
GPR slab map
1.6 GHz GPR images every pipe, rebar bar, and PT cable in the suspect zone so we know exactly what is beneath the thermal anomaly.
- 3
Acoustic confirm
A ground microphone over the mapped pipe confirms the pressurised leak sound at the suspected point.
- 4
Patch window mark
Repair window marked between rebar/PT cables — your plumber cuts one tile-sized patch, clear of structure.
Revelstoke questions, answered
Why does the GPR step matter if thermal already found the warm spot?
The warm spot tells you roughly where the water is — not where the pipe is, or what else is embedded in the slab. Cutting on thermal alone risks hitting rebar or a post-tension cable. GPR maps the slab internals so the patch lands on the pipe and nothing else.
Can you scan post-tensioned slabs?
Yes — PT cable mapping is one of GPR's core jobs. Cutting a tensioned cable is catastrophic, so on any post-1970s suspended slab we map cables first and mark the repair window between them.
Does slab thickness affect detection?
Standard 100–200 mm residential and commercial slabs are well within 1.6 GHz range. Thickened footings and toppings up to ~45 cm still image clearly; beyond that we adjust antenna frequency.
Will my floor finish be damaged?
No. GPR, thermal, and acoustic are all surface-contact, non-destructive methods. The only opening ever made is the final repair patch — by your contractor, exactly where we mark.
How deep can GPR scan in Revelstoke?
Revelstoke sits on Columbia valley gravels and outwash under heavy snowpack. Gravels scan well in the snow-free season; deep frost and snowmelt saturation define the survey calendar more than the geology does. We select antenna frequency to match — and where local ground limits radar depth, we pair GPR with electromagnetic locating, acoustic methods, or tracer gas so the survey objective is met regardless of soil conditions.
Do you actually work in Revelstoke, or dispatch from elsewhere?
Revelstoke is part of our standing Columbia service area — the same certified technicians and equipment that cover the rest of the region. Scheduling is typically within 24–72 hours, with same-day response often possible during business hours (Mon–Sat, 8am–6pm Pacific).
What does slab leak detection cost in Revelstoke?
Pricing matches our province-wide structure — no regional premium for Revelstoke. Most residential-scale work falls in the $350–$1,200 range depending on scope; commercial and multi-site projects are quoted after a free phone consult. Call 604-239-9934 and we will give you a tight estimate in five minutes.
Other GPR services in Revelstoke
Underground Water Leak Detection in Revelstoke
GPR + acoustic correlation locates buried water service line and main leaks before any excavation — typically narrowing the dig to a 1-metre window.
View servicePost-Tension Cable Mapping in Revelstoke
Cutting a live PT cable releases tonnes of force instantly. GPR maps every cable before any coring, cutting, or anchoring on a post-tensioned slab.
View serviceCore Drilling Safety Scanning in Revelstoke
Every core hole cleared before the bit touches concrete — rebar, PT cables, conduits, and in-slab pipes mapped at each penetration point.
View servicePipe Leak Detection in Revelstoke
Any pipe, any material — metal, PVC, PEX, asbestos-cement. GPR sees what EM locators can't, and pairs with acoustic and tracer gas for the confirmation.
View serviceSlab Leak Detection near Revelstoke
Need slab leak detection in Revelstoke?
Free phone consult with a certified GPR technician — we will tell you whether a survey is warranted and quote it in five minutes. No pressure.