Free phone consult with a 25-year leak expert. Call 604-239-9934

GPR Services · Metro Vancouver

Sewer Leak Detection in West Vancouver, BC

GPR finds the voids and washouts that leaking sewers carve around themselves, while CCTV confirms the failure from inside the pipe. Serving West Vancouver and the Metro Vancouver region with certified technicians, non-invasive methods, and insurance-ready documentation — since 1999.

Void imaging
GPR's unique signal
CCTV pairing
Inside-pipe confirmation
PACP coded
Industry-standard defects

Free phone consult · No pressure · Mon–Sat 8am–6pm PT

West Vancouver ground conditions & what they mean for GPR

Local geology: West Vancouver sits on rocky till benches over granite, thin soils on the upper British Properties slopes. Thin rocky soils put most utilities shallow and image crisply; granite below returns nothing, which itself maps where rock starts — useful for excavation planning.

Local building stock: BC's highest-value detached stock — metered water (District leak-adjustment program), estate properties with pools, extensive irrigation, and long private drives.

Common sewer leak detection work in West Vancouver

  • Estate irrigation and pool line tracing
  • Metered-leak service line location for District adjustment claims
  • Private drive utility locates before gate and landscape works
  • Sub-slab sewer failures
  • Yard lateral leaks
  • Pre-sinkhole void detection

How the West Vancouver site visit works

  1. 1

    GPR void survey

    Leaking sewers erode soil around the failure. GPR images these voids and saturated zones from the surface — often before any surface symptom.

  2. 2

    CCTV inspection

    A push camera or crawler documents the failure from inside: cracks, offset joints, root intrusion, with PACP defect coding.

  3. 3

    Correlate

    The GPR anomaly and the CCTV defect footage are matched by chainage so the surface mark sits exactly over the failure.

  4. 4

    Repair scope

    Report recommends point repair, lining, or replacement — with the void extent documented for ground remediation.

West Vancouver questions, answered

Why use GPR when a sewer camera already exists?

The camera sees the pipe's inside; GPR sees what the leak has done to the ground around it. A hairline crack can hide a washout void several times the pipe diameter — the thing that eventually becomes a sinkhole. Scoping the repair without the void picture routinely under-scopes the job.

Can you find sewer leaks under slabs?

Yes — under-slab sanitary failures are a classic GPR call. The void and moisture halo image clearly through 100–200 mm slabs with the 1.6 GHz antenna, and CCTV confirms from the cleanout.

What is PACP coding and why does it matter?

PACP (Pipeline Assessment Certification Program) is the NASSCO standard for coding pipe defects. Coded reports let engineers, municipalities, and insurers compare condition objectively — and they hold up in disputes.

Do leaking sewers affect my water bill?

Usually no — sewers are gravity drains, not pressurised supply. The cost shows up instead as ground settlement, odours, pest attraction, and eventually structural undermining. That is why void detection matters more than flow measurement on sanitary leaks.

How deep can GPR scan in West Vancouver?

West Vancouver sits on rocky till benches over granite, thin soils on the upper British Properties slopes. Thin rocky soils put most utilities shallow and image crisply; granite below returns nothing, which itself maps where rock starts — useful for excavation planning. We select antenna frequency to match — and where local ground limits radar depth, we pair GPR with electromagnetic locating, acoustic methods, or tracer gas so the survey objective is met regardless of soil conditions.

Do you actually work in West Vancouver, or dispatch from elsewhere?

West Vancouver is part of our standing Metro Vancouver service area — the same certified technicians and equipment that cover the rest of the region. Scheduling is typically within 24–72 hours, with same-day response often possible during business hours (Mon–Sat, 8am–6pm Pacific).

What does sewer leak detection cost in West Vancouver?

Pricing matches our province-wide structure — no regional premium for West Vancouver. Most residential-scale work falls in the $350–$1,200 range depending on scope; commercial and multi-site projects are quoted after a free phone consult. Call 604-239-9934 and we will give you a tight estimate in five minutes.

Need sewer leak detection in West Vancouver?

Free phone consult with a certified GPR technician — we will tell you whether a survey is warranted and quote it in five minutes. No pressure.

Related content

Related guides, comparisons & specialist hubs

Internal navigation map for visitors and search engines — every Leak.ca pillar is one click away.