GPR Services · Metro Vancouver
Pool Leak Detection in Burnaby, BC
GPR traces the buried plumbing loops around your pool so pressure testing and acoustic work isolate the leaking line without tearing up the deck. Serving Burnaby and the Metro Vancouver region with certified technicians, non-invasive methods, and insurance-ready documentation — since 1999.
Free phone consult · No pressure · Mon–Sat 8am–6pm PT
Burnaby ground conditions & what they mean for GPR
Local geology: Burnaby sits on glacial till slopes with peat pockets around Burnaby Lake and Big Bend. Till slopes give clean 2–3 m penetration; peat and high water table near Burnaby Lake and Big Bend cut effective depth — survey design accounts for it.
Local building stock: Metrotown and Brentwood tower clusters on post-tensioned slabs, 1960s–70s walk-ups mid-slope, and heavy industrial along the Fraser.
Common pool leak detection work in Burnaby
- Parkade deck scans in Metrotown towers
- Utility locates on industrial Big Bend sites
- Slab leak tracing in aging walk-ups
- Concrete scanning for Brentwood high-rise penetrations
- Concrete + vinyl + fibreglass pools
- Spas and swim-spas
- Strata amenity pools
How the Burnaby site visit works
- 1
Evaporation test
Bucket test rules out normal evaporation (0.3–0.6 cm/day in BC summer) before any equipment is deployed.
- 2
Loop isolation
Each return, skimmer, and main-drain line is plugged and pressure-tested independently — the failing loop identifies itself.
- 3
GPR trace
The failing loop is traced under the deck with GPR, because pool plumbing rarely runs where anyone remembers.
- 4
Acoustic pinpoint
The leak is pinpointed along the traced line; one deck cut or one fitting repair instead of slab demolition.
Burnaby questions, answered
Do you have to drain the pool?
Almost never. Loop isolation, GPR tracing, and acoustic confirmation all work with the pool full. Draining is reserved for rare structural shell investigations — and draining a pool in high-water-table areas of BC can itself damage the shell.
The deck is stamped concrete — will you cut it?
Only after the leak is pinpointed, and only a single small opening at the marked point. GPR tracing exists precisely to avoid the old practice of chasing pool lines with a saw.
Our strata pool loses chemicals fast but the level looks stable. Leak?
Possibly — auto-fill systems mask water loss while the chemical bill and heating cost climb. We isolate the auto-fill, run the loss test properly, and find what the top-up was hiding.
Can you check hot tubs and swim-spas too?
Yes. Most spa leaks turn out to be union fittings at the pump or heater rather than the shell — a 30-minute confirmation that saves replacing a tub.
How deep can GPR scan in Burnaby?
Burnaby sits on glacial till slopes with peat pockets around Burnaby Lake and Big Bend. Till slopes give clean 2–3 m penetration; peat and high water table near Burnaby Lake and Big Bend cut effective depth — survey design accounts for it. We select antenna frequency to match — and where local ground limits radar depth, we pair GPR with electromagnetic locating, acoustic methods, or tracer gas so the survey objective is met regardless of soil conditions.
Do you actually work in Burnaby, or dispatch from elsewhere?
Burnaby is part of our standing Metro Vancouver service area — the same certified technicians and equipment that cover the rest of the region. Scheduling is typically within 24–72 hours, with same-day response often possible during business hours (Mon–Sat, 8am–6pm Pacific).
What does pool leak detection cost in Burnaby?
Pricing matches our province-wide structure — no regional premium for Burnaby. Most residential-scale work falls in the $350–$1,200 range depending on scope; commercial and multi-site projects are quoted after a free phone consult. Call 604-239-9934 and we will give you a tight estimate in five minutes.
Other GPR services in Burnaby
Pipe Leak Detection in Burnaby
Any pipe, any material — metal, PVC, PEX, asbestos-cement. GPR sees what EM locators can't, and pairs with acoustic and tracer gas for the confirmation.
View serviceUnderground Water Leak Detection in Burnaby
GPR + acoustic correlation locates buried water service line and main leaks before any excavation — typically narrowing the dig to a 1-metre window.
View servicePipe Tracing & Mapping in Burnaby
Lost drawings, renovated buildings, mystery valves — GPR rebuilds the as-built picture of where every line actually runs.
View serviceSlab Leak Detection in Burnaby
GPR maps the in-slab plumbing and rebar so thermal and acoustic findings convert into a single small repair patch — not a jackhammered floor.
View servicePool Leak Detection near Burnaby
Need pool leak detection in Burnaby?
Free phone consult with a certified GPR technician — we will tell you whether a survey is warranted and quote it in five minutes. No pressure.