Ground-penetrating radar · leak applications · Okanagan
GPR Leak Detection in Vernon, BC
Ground-penetrating radar applied to finding water where it shouldn't be: saturated zones under slabs, washouts and voids around failing pipes, buried lines located before acoustic crews listen. Radar sees the consequence; acoustics confirms the cause — Leak.ca runs both. Serving Vernon and the Okanagan since 1999.
Free phone consult · No pressure · Mon–Sat 8am–6pm PT
Vernon context that shapes the work
Property stock: Heritage downtown, hillside subdivisions, and ranch acreages toward the commonage.
Ground conditions: Dry-season scans reach deep; spring saturation on the lower benches briefly shortens range. Agricultural and residential irrigation crisscross most parcels.
Who calls us in Vernon
- Slab leaks needing pipe location before repair
- Suspected washouts and voids under floors and pavement
- Buried pipe networks with no reliable drawings
- Pre-repair verification before concrete is cut
The Vernon service set
GPR Underground Water Leak Detection
Saturation and washout zones mapped along buried lines.
ViewGPR Slab Leak Detection
In-slab lines located and wet zones bounded before cutting.
ViewGPR Pipe Leak Detection
Pipe routing + anomaly mapping where drawings are fiction.
ViewGPR Sewer Leak Detection
Exfiltration consequences — voids and saturated bedding — found from above.
ViewGPR Pool Leak Detection
Deck voids and saturated zones around vessels and buried returns.
ViewHow the Vernon investigation runs
- 1
Scope the question
Is the job 'find the pipe', 'bound the wet zone', 'check for voids', or all three? Antenna selection (1.6 GHz concrete to 200 MHz deep ground) follows the question and the ground.
- 2
Grid scan
Systematic passes over the suspect area — slab, pavement, or soil — capturing reflections from pipes, rebar, voids, and moisture-changed ground.
- 3
Anomaly interpretation
Radar data is read against the site's geology and construction: which anomalies are utilities, which are voids, which are saturation signatures worth acoustic follow-up.
- 4
Confirm & mark
Acoustic and moisture methods verify the leak itself where needed; everything is surface-marked and reported with depths — the map your repair crew digs or cuts from.
Why Vernon chooses Leak.ca
- Maps what acoustics can't hear: voids, washouts, saturation
- Locates the pipe AND the rebar before anyone cuts concrete
- Works through slabs, pavement, and soil from one side
- Paired with acoustic confirmation — radar + listening, one report
Vernon questions, answered
How does Vernon ground affect GPR leak work?
Ground is everything in radar. Vernon sits on predominantly lacustrine silts and gravelly benches at the head of Okanagan Lake. Dry-season scans reach deep; spring saturation on the lower benches briefly shortens range. Agricultural and residential irrigation crisscross most parcels. We pick antennas and set depth expectations to that reality — and pair radar with acoustic confirmation so the conclusion never rests on one instrument.
What do GPR leak crews actually scan for around Vernon?
The local mix follows the building stock: Heritage downtown, hillside subdivisions, and ranch acreages toward the commonage. In practice that means slab-line location before repairs, washout and void checks where pavement is settling, and buried-line mapping where drawings never existed — the everyday Vernon radar workload.
What does gpr leak detection cost in Vernon?
Province-wide pricing — no regional premium for Vernon or anywhere in the Okanagan. Single investigations start in the low-to-mid hundreds; larger properties and multi-system files are quoted by scope. The free phone consult (604-239-9934) produces a firm number in about five minutes. Mon–Sat, 8am–6pm PT.
Can GPR actually 'see' a water leak?
It sees what leaks do to the ground. Radar reflects off contrasts — and water changes ground's dielectric behaviour dramatically. A leak shows as saturation signatures, disturbed or washed-out bedding, and voids where soil migrated into a failing pipe. GPR maps those consequences and the pipe's exact position; acoustic methods then confirm the active escape point. The pairing is the method — neither alone is the whole answer.
When is GPR the right call versus acoustic-only detection?
GPR earns its place when geometry is unknown or the ground itself is in question: no reliable drawings, suspected voids under slabs, pavement settling near a line, in-slab pipes that must be located before cutting, or rebar that must be cleared before coring into a repair. If the pipe's route is known and the question is purely 'where along it is the leak' — acoustics may be all the job needs, and we'll say so.
Full GPR services hub (33 services)·GPR technology explained·GPR pillar guide·gpr.leak.ca specialist hub
GPR Leak Detection near Vernon
Need gpr leak detection in Vernon?
Free phone consult — symptoms, scope, and a firm quote in five minutes. No pressure.