Free phone consult with a 25-year leak expert. Call 604-239-9934

EM Line Locating · Pre-dig · dual-method · Fraser Valley

EM + GPR Utility Clearance Survey in Chilliwack, BC

The complete pre-dig clearance: passive sweep, active EM tracing of every conductive line, GPR imaging for non-conductive lines and confirmation, sonde tracing for drains, and depths at the dig point. The single survey that makes breaking ground safe — and the everyday private locate done right. Serving Chilliwack and the Fraser Valley since 1999 — EM and GPR run together.

EM + GPR
Both methods, every survey
Conductive + not
Metal, plastic, clay, concrete
Pre-dig
Clearance before the shovel

Free phone consult · No pressure · Mon–Sat 8am–6pm PT

Chilliwack context that shapes the locate

Ground conditions: Free-draining floodplain gravels are superb GPR ground — 3–4 m penetration is routine, among the best in the Lower Mainland.

Local stock: Dairy and berry operations, fast-growing Sardis subdivisions, and military lands with legacy buried infrastructure.

Best suited for

  • Any excavation on private property
  • Pre-dig clearance beyond BC One Call's public scope
  • Pros who can't afford to strike a line
  • Sites where unknown utilities are likely

How + gpr utility clearance survey runs in Chilliwack

  1. 1

    Passive sweep first

    The survey opens with a power-and-radio passive sweep — flagging energised cables and conductive lines before anything is connected or dug. Safety-critical lines surface first.

  2. 2

    Active EM tracing

    Every known and discoverable conductive utility is traced precisely by direct connection, clamp, or induction — water, gas, electrical, telecom, tracer-wired plastic — each marked with depth at the dig point.

  3. 3

    GPR imaging

    GPR sweeps the area for what EM can't see: non-conductive plastic and clay lines, concrete ducts, unknown anomalies, and confirmation of the EM traces. The two methods close each other's gaps.

  4. 4

    Mark, depth, document

    The dig box is marked, depths noted at crossings and the work area, drains sonde-traced where present, and the clearance documented. Where digging follows, hand-exposure or vacuum potholing verifies the critical lines before machinery.

Chilliwack questions, answered

How does Chilliwack ground affect EM and GPR locating?

EM line tracing is largely soil-independent — it follows the signal on the conductor regardless of what's around it — but GPR, the half that finds non-conductive plastic and clay lines, is very soil-sensitive. Chilliwack sits on predominantly Fraser floodplain gravels and sands with mountain-fan gravels at the valley edges. Free-draining floodplain gravels are superb GPR ground — 3–4 m penetration is routine, among the best in the Lower Mainland. So in Chilliwack we lean on EM for the metal and tracer-wired lines and set realistic GPR expectations for the plastic — which is exactly why running both methods matters here.

What gets located most around Chilliwack?

The local mix follows the building stock: Dairy and berry operations, fast-growing Sardis subdivisions, and military lands with legacy buried infrastructure. Underneath that, the everyday Chilliwack locate is private water and irrigation services, power to outbuildings and gates, gas to outdoor features, and the plastic mains that need GPR or sonde tracing — the private-side utilities no public locate covers.

Do I still need a private locate in Chilliwack if I called BC One Call?

Yes. BC One Call marks member utilities' public lines to the property line across Chilliwack and all of BC — it does not locate the private services beyond it, which is where most strikes happen. The EM + GPR clearance survey covers those private lines. Use both: BC One Call for the public locates, a private dual-method locate for everything on your side.

What does EM + GPR locating cost in Chilliwack?

Province-wide pricing — no regional premium for Chilliwack or anywhere in the Fraser Valley. A focused clearance (a dig area, a fence line) starts in the low-to-mid hundreds; full-site mapping and SUE-grade work are quoted by scope. The free phone consult (604-239-9934) gives a firm number in about five minutes. Mon–Sat, 8am–6pm PT.

What is a private utility locate and why isn't BC One Call enough?

BC One Call (the provincial one-call service) notifies member utilities to mark their PUBLIC lines up to the property line — it does not cover the privately-owned lines beyond it: your water service, irrigation, private power to a garage, gas to a fire pit, septic, and so on. A private utility clearance survey finds those. Every responsible dig uses both: call BC One Call for the public locates, and hire a private locate for everything on your side of the line.

Why does a proper clearance need both EM and GPR?

Because no single method finds everything. EM traces conductive lines precisely but is blind to non-conductive plastic and clay; GPR images the subsurface including non-conductive lines but can't label which conductive line is which the way an EM trace can. Run together, EM identifies and traces the metal and tracer-wired lines while GPR catches the plastic, the clay, and the unknowns — and each confirms the other. Dual-method is the standard a defensible locate is held to.

Need em + gpr utility clearance survey in Chilliwack?

Free phone consult — what's underground, what you're digging, and a firm quote in five minutes.

Related content

Related guides, comparisons & specialist hubs

Internal navigation map for visitors and search engines — every Leak.ca pillar is one click away.