Utility Locating · Metro Vancouver
As-Built Utility Documentation in Surrey, BC
The drawings say one thing; the ground says another. We survey what was ACTUALLY installed — before backfill hides it for thirty years. Serving Surrey and the Metro Vancouver region with certified locators, WorkSafe BC damage-prevention practice, and written documentation — since 1999.
Free phone consult · No pressure · Mon–Sat 8am–6pm PT
The BC One Call gap in Surrey
BC 1 Call marks public utilities to your property line — always request it, it's free. But every service inside the line is private and stays unmarked. That gap is where most utility strikes happen, and liability lands on whoever dug. This service closes the gap.
Locating conditions in Surrey
Ground: Surrey sits on till uplands across Whalley and Fleetwood, Serpentine/Nicomekl floodplain silts through the lowlands. Upland till scans 2–3 m reliably; the Serpentine and Nicomekl floodplains run wet and silty, so deep targets there lean on EM pairing and tighter grids.
What's buried here: BC's fastest-growing city — City Centre highrise slabs, vast 1980s–2000s subdivisions, and farm parcels with undocumented private services.
Common as-built utility documentation work in Surrey
- Pre-construction locates on infill developments
- Private utility mapping on agricultural parcels
- Underground service leak tracing in 1980s subdivisions
- Slab scanning across City Centre tower construction
- New construction utility records
- Renovation closeout documentation
- Strata and facility records
How the Surrey locate works
- 1
Capture open trenches
The cheapest as-built is the one recorded before backfill — we survey installed services in the open trench when scheduling allows.
- 2
Verify after cover
Where backfill beat us to it, GPR + EM verify the installed routes against the design drawings.
- 3
Flag the deviations
Every divergence between design and installation is documented — the differences are precisely what future crews need to know.
- 4
Issue the record
Layered CAD as-built plus PDF atlas; the property's permanent subsurface memory.
How to read the marks we leave
CSA/APWA uniform colour code. Standard practice: mechanical digging stays 60 cm clear of any mark; the last hand-width is exposed by hand or hydrovac.
Surrey questions, answered
The contractor gave us as-builts. Why verify?
Construction as-builts are routinely red-lined design drawings, not measurements — field changes, unmarked reroutes, and 'close enough' drafting accumulate. Independent verification catches the deviations before they become the next decade's mystery strikes. We find meaningful divergence on the majority of sites we check.
When is the best time to capture as-builts?
Open-trench, before backfill — survey-grade positions at minimal cost. Second best is immediately post-construction while installers remember the routes. The most expensive time is fifteen years later, which is when most owners call.
What goes into the final record?
Routes, depths, materials, junctions, valves, and access points — layered by utility in CAD, attributed with capture method and confidence, plus a readable PDF atlas. Facility managers use the atlas; engineers use the CAD.
Can you build as-builts for an old building with nothing on file?
Yes — that's reconstructive mapping: GPR + EM + sonde tracing assemble the record from the ground itself. It's the same service as utility mapping, deliberately formatted as the as-built the building never had.
Does BC One Call cover my Surrey property?
Only partially. BC 1 Call marks registered public utilities up to your property line — free, and you should always use it. Everything inside the line is private and unmarked: irrigation, gas runs to outbuildings, landscape lighting, old septic, abandoned services. Surrey's stock — bC's fastest-growing city — City Centre highrise slabs, vast 1980s–2000s subdivisions, and farm parcels with undocumented private services. — is exactly where those private surprises accumulate. Private locating closes that gap before you dig.
How do Surrey ground conditions affect the locate?
Surrey sits on till uplands across Whalley and Fleetwood, Serpentine/Nicomekl floodplain silts through the lowlands. Upland till scans 2–3 m reliably; the Serpentine and Nicomekl floodplains run wet and silty, so deep targets there lean on EM pairing and tighter grids. Where local conditions limit one technology, the survey leans on the others — EM tracing, sonde work, and acoustic methods — so the locate objective is met regardless of soil.
How quickly can you do a locate in Surrey?
Surrey is inside our standing Metro Vancouver coverage — typical scheduling is 24–72 hours, with same-day service often possible during business hours (Mon–Sat, 8am–6pm Pacific). Pricing follows our province-wide structure with no regional premium; the free phone consult produces a firm number in about five minutes: 604-239-9934.
Related locating services in Surrey
Utility Mapping Services in Surrey
One locate marks the ground for a week. A utility map documents the property for decades — layered CAD/GIS deliverables of everything beneath your site.
View serviceSubsurface Utility Engineering (SUE) in Surrey
ASCE 38 quality-level utility investigation for engineers and capital projects — from records research (QL-D) to surveyed, daylighted certainty (QL-A).
View servicePrivate Utility Locating in Surrey
BC One Call stops at the property line. We locate everything inside it — water, gas, power, comms, irrigation, septic, and the abandoned lines nobody remembers — before anyone digs.
View serviceTelecommunications Infrastructure Mapping in Surrey
Copper, coax, fibre, and the conduit packs that carry them — campus and corridor comms plant mapped end to end, vault to vault.
View service← All about as-built utility documentation·Utility locating hub·GPR utility locating in Surrey
As-Built Utility Documentation near Surrey
Digging soon in Surrey?
Free phone consult with a certified locator — scope, price, and schedule in five minutes. No pressure, and we'll tell you if One Call alone covers your situation.