Aerial Thermal · Vancouver Island
Roof Thermal Inspection in Sidney, BC
Radiometric drone thermography over flat commercial and industrial roofs — trapped moisture, failed insulation, and developing leaks mapped before interior damage shows. Flown by Transport Canada-certified RPAS pilots serving Sidney and the Vancouver Island region — since 1999 as BC's leak detection and inspection specialists.
Free phone consult · No pressure · Mon–Sat 8am–6pm PT
Flying Sidney: local context
Beside YYJ — flights run under our standing authorizations; seaside condos and airport-industrial roofs make up the work.
Local asset profile: Compact seaside town of postwar bungalows and newer condos, with airport-industrial lands adjacent.
Typical roof thermal inspection work around Sidney
- Condo envelope scans
- Industrial roof surveys
- Flat commercial and industrial roofs
- Pre-purchase and pre-warranty surveys
- Post-storm assessments
How the Sidney survey runs
- 1
Evening flight window
Wet insulation holds daytime heat after sunset — the survey flies in that contrast window for maximum signal.
- 2
Radiometric mapping
Calibrated thermal plus visual overlay captures the full roof; anomalies are measured, not just colourful.
- 3
Verification
Thermal anomalies are confirmed as moisture (vs. shading or material artifacts) by pattern analysis and, where useful, on-roof spot checks.
- 4
Moisture plan
A roof plan with quantified wet zones — the document that turns 'replace it all' into targeted repairs.
Sidney questions, answered
How does thermal imaging find roof moisture?
Water has high thermal mass: insulation that got wet during the day re-radiates heat after sunset noticeably longer than dry insulation. A radiometric sensor measures that differential — wet zones literally glow against the cooling roof field, and the imagery maps their boundaries.
Why fly it instead of walking the roof with a camera?
Coverage, consistency, and membrane safety. A drone maps hectares in an evening at uniform angle and altitude with GPS-tagged frames — no missed bays, no foot traffic on an aging membrane, no fall exposure. Walking surveys still have a place for verification cores; the aerial map decides where.
Can you inspect any roof type?
Best results come from flat and low-slope membrane systems (BUR, mod-bit, EPDM, TPO) over absorbent insulation. Ballasted and inverted assemblies attenuate the signal and are assessed case-by-case. Metal and steep roofs are usually better served by our envelope thermal service.
What does the deliverable look like?
A scaled roof plan with outlined moisture zones, the radiometric evidence per zone, square-metre quantities, and repair-priority ranking — formatted for owners, roofing contractors, and insurers to act on directly.
Can you legally fly drones for inspection in Sidney?
Yes — our pilots hold Transport Canada RPAS certification with advanced-operations capability, and Sidney operations run under whatever airspace authorizations the location requires. Beside YYJ — flights run under our standing authorizations; seaside condos and airport-industrial roofs make up the work. Flight planning, NOTAM checks, and authorizations are part of the service, not your problem.
How does Sidney weather affect scheduling?
Aerial inspection flies in defined weather windows — wind, precipitation, and (for thermal work) the right temperature differentials. Sidney sits in our standing Vancouver Island coverage, so we schedule against the local forecast and typically land the survey within days of booking rather than weeks. Mon–Sat, 8am–6pm Pacific.
What does roof thermal inspection cost in Sidney?
Province-wide pricing — no regional premium for Sidney. Single-asset thermal surveys typically start in the high hundreds; NDT campaigns and multi-asset programs are quoted by scope. The free phone consult (604-239-9934) produces a firm number in about five minutes.
Other aerial services in Sidney
Aerial Façade & Envelope Thermal in Sidney
Thermal bridges, insulation gaps, air leakage, and moisture behind cladding — full-height envelope thermography for high-rises without a single rope or swing stage.
View serviceAerial Industrial Thermal Survey in Sidney
Heat-loss mapping on tanks and pipelines, refractory damage, stack hot spots, and district-energy networks — plant-scale radiometric surveys from the air.
View serviceAerial Solar Farm Inspection in Sidney
Hot spots, string failures, bypass-diode faults, and underperforming modules — radiometric drone survey of entire PV arrays without taking the system offline.
View serviceAerial Ultrasonic Testing (UT) in Sidney
Contact UT wall-thickness measurement delivered by drone — corrosion mapping on tanks, stacks, and structures at height without scaffolding, rope access, or shutdown.
View service← All about roof thermal inspection·Aerial inspection hub·drone.leak.ca
Aerial Roof Thermal Inspection near Sidney
Need roof thermal inspection in Sidney?
Free phone consult — asset, access, airspace, and a firm quote in five minutes. No pressure.