Aerial Thermal · Okanagan
Façade & Envelope Thermal in Vernon, BC
Thermal bridges, insulation gaps, air leakage, and moisture behind cladding — full-height envelope thermography for high-rises without a single rope or swing stage. Flown by Transport Canada-certified RPAS pilots serving Vernon and the Okanagan region — since 1999 as BC's leak detection and inspection specialists.
Free phone consult · No pressure · Mon–Sat 8am–6pm PT
Flying Vernon: local context
Hillside subdivisions and ranch buildings; strong solar adoption adds PV inspection demand.
Local asset profile: Heritage downtown, hillside subdivisions, and ranch acreages toward the commonage.
Typical façade & envelope thermal work around Vernon
- Hillside roof scans
- Residential solar checks
- High-rise residential and strata towers
- Curtain-wall and window-line investigations
- Energy retrofits and audits
How the Vernon survey runs
- 1
Condition window
Surveys fly at dawn/dusk with a meaningful inside-outside temperature differential — when envelope defects express most clearly.
- 2
Elevation mapping
Each façade captured systematically, floor by floor — radiometric thermal with visual registration.
- 3
Defect interpretation
Thermal bridges, missing insulation, air-leak paths, and moisture signatures are separated by pattern — not every cold line is a defect, and the report says which is which.
- 4
Envelope report
Elevation drawings annotated with classified anomalies — input-ready for envelope engineers, retrofit planning, or strata councils.
Vernon questions, answered
What can thermal imaging see in a building façade?
Temperature patterns that betray what is behind the surface: continuous cold lines at slab edges (thermal bridging), blotchy cold zones (missing or slumped insulation), plume-shaped warm paths (air exfiltration), and evaporative-cool patches (moisture behind cladding). Pattern interpretation is the skill — the camera only supplies the evidence.
Why drones instead of rope access or swing stages for envelope surveys?
A full-height tower elevation that takes a rope team days happens in a morning, with uniform image geometry and zero suspended-access risk. Budget-wise, suspended access often costs more than the entire aerial survey.
Does this help find the source of leaks into suites?
Frequently — water entering at one floor shows up two floors down inside. Envelope thermography plus interior moisture mapping brackets the actual entry point, which is the question every strata leak investigation ultimately turns on. It pairs directly with our interior leak detection services.
When is the best season for envelope thermography in BC?
Heating season — sustained indoor-outdoor differentials of 10 °C or more give the strongest signal, with calm, dry, overcast conditions ideal. Coastal BC winters offer long workable windows; we schedule around the weather, not the calendar.
Can you legally fly drones for inspection in Vernon?
Yes — our pilots hold Transport Canada RPAS certification with advanced-operations capability, and Vernon operations run under whatever airspace authorizations the location requires. Hillside subdivisions and ranch buildings; strong solar adoption adds PV inspection demand. Flight planning, NOTAM checks, and authorizations are part of the service, not your problem.
How does Vernon weather affect scheduling?
Aerial inspection flies in defined weather windows — wind, precipitation, and (for thermal work) the right temperature differentials. Vernon sits in our standing Okanagan coverage, so we schedule against the local forecast and typically land the survey within days of booking rather than weeks. Mon–Sat, 8am–6pm Pacific.
What does façade & envelope thermal cost in Vernon?
Province-wide pricing — no regional premium for Vernon. Single-asset thermal surveys typically start in the high hundreds; NDT campaigns and multi-asset programs are quoted by scope. The free phone consult (604-239-9934) produces a firm number in about five minutes.
Other aerial services in Vernon
Aerial Roof Thermal Inspection in Vernon
Radiometric drone thermography over flat commercial and industrial roofs — trapped moisture, failed insulation, and developing leaks mapped before interior damage shows.
View serviceAerial Industrial Thermal Survey in Vernon
Heat-loss mapping on tanks and pipelines, refractory damage, stack hot spots, and district-energy networks — plant-scale radiometric surveys from the air.
View serviceAerial Coating Thickness (DFT) in Vernon
Dry-film thickness verification at height by drone — magnetic-induction and eddy-current measurement on tanks, stacks, bridges, and structural steel. No lifts, no ropes.
View serviceAerial BESS Thermal Monitoring in Vernon
Battery energy storage thermography — abnormal temperature rise in racks and containers caught early, from a safe standoff, on energised systems.
View service← All about façade & envelope thermal·Aerial inspection hub·drone.leak.ca
Aerial Façade & Envelope Thermal near Vernon
Need façade & envelope thermal in Vernon?
Free phone consult — asset, access, airspace, and a firm quote in five minutes. No pressure.