Aerial NDT · Shuswap
Coating Thickness (DFT) in Salmon Arm, BC
Dry-film thickness verification at height by drone — magnetic-induction and eddy-current measurement on tanks, stacks, bridges, and structural steel. No lifts, no ropes. Flown by Transport Canada-certified RPAS pilots serving Salmon Arm and the Shuswap region — since 1999 as BC's leak detection and inspection specialists.
Free phone consult · No pressure · Mon–Sat 8am–6pm PT
Flying Salmon Arm: local context
Lakeside town with farm parcels — barns, marinas, and hillside homes.
Local asset profile: Lakeside town centre, farm parcels, and hillside view subdivisions.
Typical coating thickness (dft) work around Salmon Arm
- Barn roof checks
- Marina structure scans
- New coating QA at height
- Warranty and recoat disputes
- Tank, stack, and bridge programs
How the Salmon Arm survey runs
- 1
Specification review
The coating spec defines required DFT and measurement standard — the survey is built to verify exactly that.
- 2
Aerial measurement
Magnetic induction on ferrous, eddy current on non-ferrous substrates — the probe contacts and records automatically.
- 3
Statistical coverage
Readings across all elevations and orientations — the high, awkward areas where coating failures actually start and manual checks never reach.
- 4
Compliance report
Per-point values, statistics against specification, and GPS-tagged photos — the document the applicator, owner, and warranty all reference.
Salmon Arm questions, answered
Why measure coating thickness at height instead of just at grade?
Because failures start where application was hardest — tops of tanks, upper stack sections, bridge members over water. Grade-level readings systematically miss the highest-risk areas. Aerial DFT samples the whole asset, which is what a credible warranty or QA file requires.
Which standards do your DFT surveys follow?
Surveys are run to the measurement practice your specification cites — SSPC-PA 2 conventions for acquisition and averaging are the common default. Instrument class covers 0–1.5 mm on ferrous and 0–0.7 mm on non-ferrous substrates.
Can this resolve a dispute with our coating contractor?
It usually settles it one way or the other: hundreds of GPS-tagged, photo-documented readings against the spec leave little to argue about. Both owners and applicators hire us for exactly that neutrality.
Do you measure DFT on bridges and infrastructure?
Yes — bridge steel, transmission structures, stacks, and tank farms are the core use cases. Anywhere the alternative is lane closures, lifts, or rope teams, the aerial economics win quickly.
Can you legally fly drones for inspection in Salmon Arm?
Yes — our pilots hold Transport Canada RPAS certification with advanced-operations capability, and Salmon Arm operations run under whatever airspace authorizations the location requires. Lakeside town with farm parcels — barns, marinas, and hillside homes. Flight planning, NOTAM checks, and authorizations are part of the service, not your problem.
How does Salmon Arm weather affect scheduling?
Aerial inspection flies in defined weather windows — wind, precipitation, and (for thermal work) the right temperature differentials. Salmon Arm sits in our standing Shuswap coverage, so we schedule against the local forecast and typically land the survey within days of booking rather than weeks. Mon–Sat, 8am–6pm Pacific.
What does coating thickness (dft) cost in Salmon Arm?
Province-wide pricing — no regional premium for Salmon Arm. Single-asset thermal surveys typically start in the high hundreds; NDT campaigns and multi-asset programs are quoted by scope. The free phone consult (604-239-9934) produces a firm number in about five minutes.
Other aerial services in Salmon Arm
Aerial EMAT Inspection in Salmon Arm
Electromagnetic acoustic transducer thickness testing by drone — no couplant, up to 4 mm lift-off, made for corroded, dirty, or coated steel where conventional UT struggles.
View serviceAerial Ultrasonic Testing (UT) in Salmon Arm
Contact UT wall-thickness measurement delivered by drone — corrosion mapping on tanks, stacks, and structures at height without scaffolding, rope access, or shutdown.
View serviceAerial Façade & Envelope Thermal in Salmon Arm
Thermal bridges, insulation gaps, air leakage, and moisture behind cladding — full-height envelope thermography for high-rises without a single rope or swing stage.
View serviceAerial Industrial Thermal Survey in Salmon Arm
Heat-loss mapping on tanks and pipelines, refractory damage, stack hot spots, and district-energy networks — plant-scale radiometric surveys from the air.
View service← All about coating thickness (dft)·Aerial inspection hub·drone.leak.ca
Aerial Coating Thickness (DFT) near Salmon Arm
Need coating thickness (dft) in Salmon Arm?
Free phone consult — asset, access, airspace, and a firm quote in five minutes. No pressure.